1. <programming> The prototype for an {object} in an
	{object-oriented language}; analogous to a {derived type} in a
	{procedural language}.  A class may also be considered to be a
	set of objects which share a common structure and behaviour.
	The structure of a class is determined by the {class
	variables} which represent the {state} of an object of that
	class and the behaviour is given by a set of {methods}
	associated with the class.

	Classes are related in a {class hierarchy}.  One class may be
	a specialisation (a "{subclass}") of another (one of its
	"{superclasses}") or it may be composed of other classes or it
	may use other classes in a {client-server} relationship.  A
	class may be an {abstract class} or a {concrete class}.

	See also {signature}.

	2. <programming> See {type class}.

	3. <networking> One of three types of {Internet addresses}
	distinguished by their most significant bits.

	3. <language> A language developed by the {Andrew Project}.
	It was one of the first attempts to add {object-oriented}
	features to {C}.

	(1995-05-01)

1. A discrepancy between a computed, observed, or measured
	value or condition and the true, specified, or theoretically
	correct value or condition.

	2. <programming> A mental mistake made by a programmer that
	may result in a program {fault}.

	3. (verb) What a program does when it stops as result of a
	programming error.

	(2000-03-28)

An error condition that changes the normal {flow of control}
	in a program.  An exception may be generated ("raised") by
	{hardware} or {software}.  Hardware exceptions include
	{reset}, {interrupt} or a signal from a {memory management
	unit}.  Exceptions may be generated by the {arithmetic logic
	unit} or {floating-point unit} for numerical errors such as
	divide by zero, {overflow} or {underflow} or {instruction
	decoding} errors such as privileged, reserved, {trap} or
	undefined instructions.  Software exceptions are even more
	varied and the term could be applied to any kind of error
	checking which alters the normal behaviour of the program.

	(1994-10-31)

<object-oriented> In {object-oriented programming}, an
	instance of the data structure and behaviour defined by the
	object's {class}.  Each object has its own values for the
	{instance variables} of its class and can respond to the
	{methods} defined by its class.

	For example, an object of the "Point" class might have
	instance variables "x" and "y" and might respond to the "plot"
	method by drawing a dot on the screen at those coordinates.

	(2004-01-26)

<text> (Or "cut and paste", after the paper, scissors and glue
	method of document production) The system supported by most
	document editing applications (e.g. {text editors}) and most
	{operating systems} that allows you to select a part of the
	document and then save it in a temporary buffer (known
	variously as the "clipboard", "cut buffer", "kill ring").  A
	"copy" leaves the document unchanged whereas a "cut" deletes
	the selected part.

	A "paste" inserts the data from the clipboard at the current
	position in the document (usually replacing any currently
	selected data).  This may be done more than once, in more than
	one position and in different documents.

	More sophisticated {operating systems} support copy and paste
	of different data types between different applications,
	possibly with automatic format conversion, e.g from {rich
	text} to plain {ASCII}.

	{GNU Emacs} uses the terms "kill" instead of "cut" and "yank"
	instead of "paste" and data is stored in the "kill ring".

	[Origin?  Macintosh?  Xerox?]

	(1998-07-01)

1. <unit, text> (Sometimes abbreviated "pt") The unit of
	length used in {typography} to specify text character height,
	{rule} width, and other small measurements.

	There are six slightly different definitions: {Truchet point},
	{Didot point}, {ATA point}, {TeX point}, {Postscript point},
	and {IN point}.

	In Europe, the most commonly used is Didot and in the US, the
	formerly standard ATA point has essentially been replaced by
	the PostScript point due to the demise of traditional
	typesetting systems and rise of desktop computer based systems
	running software such as {QuarkXPress}, {Adobe InDesign} and
	{Adobe Pagemaker}.

	There are 20 {twips} in a point and 12 points in a {pica}
	(known as a "Cicero" in the Didot system).

	{Different point systems
	(http://www.vakcer.com/oberon/dtp/fonts/point.htm)}.

	(2004-12-23)

	2. <hardware> To move a {pointing device} so that the
	on-screen pointer is positioned over a certain object on the
	screen such as a {button} in a {graphical user interface}.  In
	most {window systems} it is then necessary to {click} a
	(physical) button on the pointing device to activate or select
	the object.  In some systems, just pointing to an object is
	known as "mouse-over" {event} which may cause some help text
	(called a "tool tip" in {Windows}) to be displayed.

	(2001-05-21)

In {object-oriented programming} sending a message to an
	{object} (to invoke a {method}) is equivalent to calling a
	{procedure} in traditional programming languages, except that
	the actual code executed may only be selected at run time
	depending on the {class} of the object.  Thus, in response to
	the message "drawSelf", the method code invoked would be
	different if the target object were a circle or a square.

	(1995-02-16)

1. <programming> An {address}, from the point of view of a
	programming language.  A pointer may be typed, with its {type}
	indicating the type of data to which it points.

	The terms "pointer" and "reference" are generally
	interchangable although particular programming languages often
	differentiate these two in subtle ways.  For example, {Perl}
	always calls them references, never pointers.  Conversely, in
	C, "pointer" is used, although "a reference" is often used to
	denote the concept that a pointer implements.

	{Anthony Hoare} once said:

	Pointers are like jumps, leading wildly from one part of the
	data structure to another.  Their introduction into high-level
	languages has been a step backward from which we may never
	recover.

	[C.A.R.Hoare "Hints on Programming Language Design", 1973,
	Prentice-Hall collection of essays and papers by Tony Hoare].

	2. <operating system> (Or "mouse pointer") An {icon}, usually
	a small arrow, that moves on the screen in response to
	movement of a {pointing device}, typically a {mouse}.  The
	pointer shows the user which object on the screen will be
	selected etc. when a mouse button is clicked.

	(1999-07-07)

<software> Instructions for a computer in some programming
	language, often {machine language}.  The word "code" is often
	used to distinguish instructions from {data} (e.g. "The code
	is marked 'read-only'") whereas "{software}" is used in
	contrast with "{hardware}" and may consist of more than just
	code.

	(2000-04-08)

<World-Wide Web, database, tool> {Allaire Corporation}'s
	commercial {database} application development tool that allows
	{databases} to have a {World-Wide Web} {interface}, so a
	database can be queried and updated using a {web browser}.

	The ColdFusion Server application runs on the {web server} and
	has access to a {database}.  ColdFusion files on the web
	server are {HTML} pages with additional ColdFusion commands to
	{query} or {update} the database, written in {CFML}.  When the
	page is requested by the user, the {web server} passes the
	page to the Cold Fusion application, which executes the {CFML}
	commands, places the results of the {CFML} commands in the
	{HTML} file, and returns the page to the {web server}.  The
	page returned to the {web server} is now an ordinary {HTML}
	file, and it is sent to the user.

	Examples of ColdFusion applications include order entry, event
	registration, catalogue search, directories, calendars, and
	interactive training.  ColdFusion applications are robust
	because all database interactions are encapsulated in a single
	industrial-strength {CGI} script.  The formatting and
	presentation can be modified and revised at any time (as
	opposed to having to edit and recompile {source code}).

	ColdFusion Server can connect with any database that supports
	{ODBC} or {OLE DB} or one that has a native database driver.
	Native database drivers are available for {Oracle} and
	{Sybase} databases.

	ColdFusion is available for {Windows}, {Solaris}, and {HP-UX}.
	A {development environment} for creating ColdFusion files,
	called ColdFusion Studio, is also available for {Windows}.

	Current version: MX(6), as of 2003-07-11.

	The {filename extension} for ColdFusion files is .cfm

	{Home (http://www.coldfusion.com/)}.

	(2003-07-27)

<programming> Producing a more defined version of some object
	by replacing variables with values (or other variables).

	1. In {object-oriented programming}, producing a particular
	{object} from its {class template}.  This involves allocation
	of a structure with the types specified by the template, and
	initialisation of {instance variables} with either default
	values or those provided by the class's {constructor}
	function.

	2. In {unification}, (as used in {logic programming}, {type
	checking} and {type inference}), binding a {logic variable}
	({type variable}) to some value (type).

	(1995-03-28)