http://www.sagewire.org/Blogs and forums for Java, PHP, MySQL, and more.enhttp://www.sagewire.org/server-admin/ColdFusion-ODBC-Server-CF7-1996418.aspxJust curious as to why there is a ColdFusion ODBC Server that is run be default? I thought it was necessary to run this to use data connections with ColdFusion but it turns out all of our sites run 100-fold faster and better with the darn thing turned off and there is no issue connecting to data sources!? So why is it there at all? Just curious more than anything.http://www.sagewire.org/server-admin/ColdFusion-ODBC-Server-CF7-1996418.aspxrss@sagewire.orgSat, 27 Oct 2007 01:12:27 GMThttp://www.sagewire.org/server-admin/Cold-Fusion-Service-unable-to-restart-1993488.aspxWe've recently upgraded from CF7 to CF8. We downloaded the trial version and then purchased the license. Twice, the service has crashed (within 1 week). The error was essentially: windows cannot start service Cold Fusion 8 Administrator Server. If this is a non-Microsoft application, contact the Vendor. Error Code 2 We've tried everything from clearing space on the server, to restarting multiple times. The only thing that has seemed to work (t emporarily) is a re-install. How...http://www.sagewire.org/server-admin/Cold-Fusion-Service-unable-to-restart-1993488.aspxrss@sagewire.orgSat, 27 Oct 2007 00:03:09 GMThttp://www.sagewire.org/server-admin/CF-MX7-Enable-Verity-1991486.aspxHi, I'm running ColdFusion MX7 Standard and I have installed Verity and verified that it is running as a service (same computer), however, when I go into the ColdFusion Administrator, and click on Data & Services > Verity Collections, I get a message that says: You must configure your application server to enable Verity. For instructions, see "Installing and Using Cold Fusion MX." I have reinstalled Verity and searched endlessly for technotes related to this and haven't been abl...http://www.sagewire.org/server-admin/CF-MX7-Enable-Verity-1991486.aspxrss@sagewire.orgFri, 26 Oct 2007 23:07:32 GMThttp://www.sagewire.org/server-admin/CF-can-not-Connect-To-Mail-Server-1994728.aspxI have been running ColdFusion 8 since release and generally no problems. Now, it can not connect to our mail server and there appears to be no reason. Here's the setup: We have ColdFusion 8 Standard on Win 2003 server. The same box runs SmarterMail 4.3. When I try to verify connection settings in ColdFusion Administrator, it fails, using all of the same settings that worked 2 hours ago. I have tried restarting the ColdFusion service and that did not help. Any ideas are much a...http://www.sagewire.org/server-admin/CF-can-not-Connect-To-Mail-Server-1994728.aspxrss@sagewire.orgFri, 26 Oct 2007 15:52:14 GMThttp://www.sagewire.org/server-admin/Cold-Fusion-Scheduler-Tasks-running-Twice-in-702-369916.aspxI am running ColdFusion 7.02 but am seeing the bug described in Bug #61272 which caused ColdFusion Scheduler tasks to be executed twice periodically. My understanding was that this bug was fixed in ColdFusion 7.02. Is there another known bug that'd be causing this behavior?http://www.sagewire.org/server-admin/Cold-Fusion-Scheduler-Tasks-running-Twice-in-702-369916.aspxrss@sagewire.orgThu, 25 Oct 2007 23:12:40 GMThttp://www.sagewire.org/server-admin/What-are-the-recommended-steps-to-upgrade-from-CF7-1875746.aspxI have read all of the documentation for how to upgrade from ColdFusion 7.02 to ColdFusion 8. Well there is actually only one blurb in all of the ColdFusion docs. "Upgrade installation You can upgrade from Cold Fusion MX, Cold Fusion MX 6.1, and Cold Fusion MX 7. When upgrading from Cold Fusion MX, Cold Fusion MX 6.1, or Cold Fusion MX 7, the installer preserves the existing settings and installs in a new directory, automatically assigning ports that don't conflict with the exist...http://www.sagewire.org/server-admin/What-are-the-recommended-steps-to-upgrade-from-CF7-1875746.aspxrss@sagewire.orgThu, 25 Oct 2007 10:35:24 GMThttp://www.sagewire.org/server-admin/CF8-Ajax-pages-not-loading-properly-1958909.aspxHi all. Hope someone can help out with this one. Spent too much time trying to figure it out without any luck! Basically, the Cold Fusion page does not always load up properly. The page ends after displaying an improperly formatted menu (using CFMENU tag) and a JAVAscript error appears. It varies between "Ext not found" or "Cold Fusion not found" - basically indicating certain JS libraries didn't get loaded properly. This only happens occasionally and randomly and more often wit...http://www.sagewire.org/server-admin/CF8-Ajax-pages-not-loading-properly-1958909.aspxrss@sagewire.orgThu, 25 Oct 2007 07:28:42 GMThttp://www.sagewire.org/server-admin/Coexistence-of-CF7-and-CF8-on-one-server-1982890.aspxI have CFMX 7.2 running on a server using the external web server, IIS6. I have installed CF8 in the multiserver configuration onto the same server. What I read is that for these to coexist the CF8 needs to be installed on the built-in web server (also what ColdFusion apparently automatically does when the multiserver configuration is installed). One of my questions is this - if I have CF7 using the external web server can I NOT run the web configuration tool and connect my CF8 i...http://www.sagewire.org/server-admin/Coexistence-of-CF7-and-CF8-on-one-server-1982890.aspxrss@sagewire.orgWed, 24 Oct 2007 19:39:40 GMThttp://www.sagewire.org/server-admin/Cold-Fusion-install-in-ubuntu-710-1987903.aspxI tried the fix that worked w/ ubuntu 7.04 even though it was a different error. This however didn't change anything , I am still not able to install . Any input'd be greatly appreciated. ~$ cat Cold Fusion-8-lin.bin | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" > /tmp/Cold Fusion.bin ~$ sudo sh /tmp/Cold Fusion.bin Launching installer... exec: 2481: /tmp/install.dir.8037/Linux/resource/jre/bin/JAVA: not found I am running JAVA version "1.6.0_03" JAVA(T...http://www.sagewire.org/server-admin/Cold-Fusion-install-in-ubuntu-710-1987903.aspxrss@sagewire.orgWed, 24 Oct 2007 18:02:19 GMThttp://www.sagewire.org/server-admin/Max-JVM-Heap-Size-in-CF8-1991244.aspxI recently installed the CF8 Trial on a Win2003 Server (32-bit), 2 dual-core AMD 2.6GHz CPUs, 8Gb RAM. I'm trying to benchmark some processes from my production CFMX6.1 system, but I can not get the JVM settings to match. On my production server, I have the max size set to 1536M, but I can not get CF8 to start with anything over 1024M (I get that 0x2 error). Obviously, it's a newer JRE, but I do not understand why I can not go to 1.5Gb on this one. Also, should I change the defa...http://www.sagewire.org/server-admin/Max-JVM-Heap-Size-in-CF8-1991244.aspxrss@sagewire.orgWed, 24 Oct 2007 17:30:56 GMThttp://www.sagewire.org/server-admin/CF-Install-problem-1987668.aspxHi - I am new to using ColdFusion 8 and have been trying to install ColdFusion 8 developer edition. Everything works ok until I either click on browse server to locate a datasource file or click on the system info icon at the top of the admin page. I have apache 2.2.4 installed. Admin is installed inside the htdocs in the apache server directory. Any tips on where the problem may lie'd be appreciated.http://www.sagewire.org/server-admin/CF-Install-problem-1987668.aspxrss@sagewire.orgWed, 24 Oct 2007 03:51:40 GMThttp://www.sagewire.org/server-admin/Adding-classpaths-to-JVM-setting-1991613.aspxI may just be blind or missing something but HOW DO I ADD CLASSPATHS TO THE JVM SETTINGS IN CF*?http://www.sagewire.org/server-admin/Adding-classpaths-to-JVM-setting-1991613.aspxrss@sagewire.orgTue, 23 Oct 2007 22:55:43 GMThttp://www.sagewire.org/server-admin/Application-Logs-in-MX7-1992777.aspxWe run a ColdFusion server v.5 currently. We are testing an MX7 server. The error msgs in the application log are much less detailed than in the current v.5. We are testing on a 64-bit win2k3 server and have been told the MX7 hasn't been tested on 64-bit windows. We've had other app log related problems assumed to be related to the 64-bit platform. Can anyone confirm that the application log error msgs in MX7 still have as much detail as in v.5? We are used to seeing errors tha...http://www.sagewire.org/server-admin/Application-Logs-in-MX7-1992777.aspxrss@sagewire.orgTue, 23 Oct 2007 22:49:57 GMThttp://www.sagewire.org/server-admin/querystring-with-apache-1991374.aspxOn IIS when a page is redirected to a CFM page for a 404 error, the cgi.query_string variable contains the originally requested page. Is there a way to do this with apache?http://www.sagewire.org/server-admin/querystring-with-apache-1991374.aspxrss@sagewire.orgTue, 23 Oct 2007 19:22:30 GMThttp://www.sagewire.org/server-admin/Cold-Fusion-crashes-on-Microsoft-Windows-2003-R2-6-1980083.aspxI have Microsoft Windows 2003 R2 Emnterprise 64 bit version running and once I loaded ColdFusion and try to go into the administartion area or even bring up the default web page I get this is not a valid 32 bit application. Once I uninstall Cold Fusion everything works again. I heard there was something different you had to do to get this to work on 64bit windows but I can not find anything to walk me through the problem. Help is needed.http://www.sagewire.org/server-admin/Cold-Fusion-crashes-on-Microsoft-Windows-2003-R2-6-1980083.aspxrss@sagewire.orgTue, 23 Oct 2007 18:58:48 GMThttp://www.sagewire.org/server-admin/Starting-CF8-from-reboot-on-Linux-Not-working-1974287.aspxWe have just installed ColdFusion 8 in multiserver mode on Linux Redhat enterprise/apache2.0.52 Everything works fine - creating new CF instances etc. We can start the Cold Fusion process fine using the -start CFUSION command and using the Instance manager we can start all our CF instances. The problem is that none of the ColdFusion processes start up when the system is re-booted. We've to re-start them manually again. Is there some script that is supposed to be installed somewhere ...http://www.sagewire.org/server-admin/Starting-CF8-from-reboot-on-Linux-Not-working-1974287.aspxrss@sagewire.orgTue, 23 Oct 2007 15:54:26 GMThttp://www.sagewire.org/server-admin/Datasource-Error-after-CFMX8-Upgrade-1986373.aspxI just installed Cold Fusion MX 8 on Windows 2003 and deployed my .car file that I had created from my MX 6.1 install. Everything copied over successfully but none of my sql datasources verify. I'm getting the following error message: Connection verification failed for data source: data Cold Fusion.sql.DataSourceFactory$DataSourceException: Datasource data could not be found. The root cause was that: Cold Fusion.sql.DataSourceFactory$DataSourceException: Datasource data could...http://www.sagewire.org/server-admin/Datasource-Error-after-CFMX8-Upgrade-1986373.aspxrss@sagewire.orgTue, 23 Oct 2007 13:56:31 GMThttp://www.sagewire.org/server-admin/Problems-with-702-Install-1964640.aspxI am trying to install the 7.0.2 version (downloaded from the Adobe website) onto a server using VMWARE running Windows 2003 R2 SP2. I have tried multiple times installing silently and configuring the webserver manually. No errors, but when I go to open up the administrator, I immediately receive the password pop-up. I know,. probably a permissions issue, (am having the SA verify that I truely have admin rights) but . . . I haven'ticed looking at the services that I only see a...http://www.sagewire.org/server-admin/Problems-with-702-Install-1964640.aspxrss@sagewire.orgMon, 22 Oct 2007 23:13:55 GMThttp://www.sagewire.org/server-admin/ExportImport-Server-Configuration-1991373.aspxHi, I have multiple physical servers to configure that will have the same MX 7 configuration settings. Is there a way to export and then import these settings so I do not have manually complete each one? For example, I'm looking to replicate datasources, collections, scheduled tasks, CFX tags, client vars etc. Please advise. Thanks! Annhttp://www.sagewire.org/server-admin/ExportImport-Server-Configuration-1991373.aspxrss@sagewire.orgMon, 22 Oct 2007 22:31:29 GMThttp://www.sagewire.org/server-admin/Maintaining-all-CF8-instances-with-EAR-file-1991097.aspxI am going to have 11 CF8 instances on my development server. If I create them all with the same EAR will I be able to make changes to that 1 ear and affect all of the instances? If I am way off base here, can someone tell me how to make changes in one place that'd affect all instances and vice versa? CF8, IIS6, Windows 2003http://www.sagewire.org/server-admin/Maintaining-all-CF8-instances-with-EAR-file-1991097.aspxrss@sagewire.orgMon, 22 Oct 2007 19:10:40 GMThttp://www.sagewire.org/server-admin/CF8-standard-version-and-CFFILE-security-1990306.aspxI am planning to host different web sites on Windows 2003. I need to have CFFILE secured where each web site can not read/modify files outside their site's folders. Can this be done with CF8 standard or do I need to the Enterprise version? Jentelhttp://www.sagewire.org/server-admin/CF8-standard-version-and-CFFILE-security-1990306.aspxrss@sagewire.orgMon, 22 Oct 2007 08:10:48 GMThttp://www.sagewire.org/server-admin/Issue-with-pathtranslated-CFMX7-1986236.aspxI think something may be amiss with Cold Fusion. I have a test website (specifically created to test this issue) running on IIS6, that just has a plain old index.CFM and index.html. When I browse to /index.cfm/someotherdirectory/non-existantdirectory/whatever/index.cfm, it brings up the base index.cfm. When I attempt to do the same with the html file, it gives me a 404 error. How can I force Cold Fusion to give a 404 in this circumstance?http://www.sagewire.org/server-admin/Issue-with-pathtranslated-CFMX7-1986236.aspxrss@sagewire.orgFri, 19 Oct 2007 20:44:40 GMThttp://www.sagewire.org/server-admin/Crossover-cable-between-Servers-routing-traffic-1979646.aspxCan someone help me out please. I have two servers of which oracle is on one and colfusion on the other. Data CF requests is coming from a public network. Each is part of a workgroup. I want the traffic to be routed through a crossover cable which isn't the primary connection. Server1 - Cold Fusion 7 installed. ColdFusion Application installed. Server2 - Oracle database installed. ColdFusion Application accessing this server. Server 1 and 2 have a LAN connection and also a cr...http://www.sagewire.org/server-admin/Crossover-cable-between-Servers-routing-traffic-1979646.aspxrss@sagewire.orgFri, 19 Oct 2007 11:05:03 GMThttp://www.sagewire.org/server-admin/CF-Cookie-Issue-1984217.aspx:confused; background: - 2 prod servers one is running ColdFusion 6 the other ColdFusion 7 (the reason is to ensure CF 7 functions correctly w/half of our traffic for a few weeks) - both have own external IP and users are routed via round robin [def]DNS[/def] (Domain Name Service) issue: - someone logs into our SSL area successfully but when they click a link to run a report etc, they are kicked back out to login screen as if they never logged in - this isn't happening for ...http://www.sagewire.org/server-admin/CF-Cookie-Issue-1984217.aspxrss@sagewire.orgFri, 19 Oct 2007 10:54:25 GMThttp://www.sagewire.org/server-admin/Random-CFMX-61-Restarts-1982624.aspxWe have had our production intranet running on CFMX 6.1 (6,1,0,hf53852_61) for about 3 years now. In the last few weeks, we have been noticing a higher incidence of spontaneous restarts of the ColdFusion service (maybe 3-4 times per week), but there's no indication in the JRUN or ColdFusion logs of why the service is restarting. We use SeeFusion to monitor JVM memory usage and active requests, and memory is never an issue at the time of the restarts, and there are no "chunky" jobs ...http://www.sagewire.org/server-admin/Random-CFMX-61-Restarts-1982624.aspxrss@sagewire.orgThu, 18 Oct 2007 18:39:47 GMThttp://www.sagewire.org/server-admin/CF8-keeps-crashing-1970580.aspxI have 2 servers running CF8 for a few days, and if everything was ok on my test box, the productions servers keep crashing. The 2 servers share the same site using a hardware load balancer. The database is as SQL Server 2005, and the files are stored on a NAS cluster. I tried serveral parameters : JVM : min/max heapsize from 512mb to 1400 mb / maxPermSize until 256 mb number of threads : from 10 to 30. ... but it doesn't seem to haven'ticeable effects. I tried to spy my code ...http://www.sagewire.org/server-admin/CF8-keeps-crashing-1970580.aspxrss@sagewire.orgWed, 17 Oct 2007 19:31:54 GMThttp://www.sagewire.org/server-admin/logs-not-working-1981754.aspxWe upgraded a test server from mx7 to 8 standard ed. Runs win2k3 r2, 64 bit ed. When it was mx7, all logs worked normally. Now the application log does not show up. Other logs such as mailsent.log to same path do work so permissions seem ok. Any ideas obvious or otherwise? A giant check box that says enable application log logging? Did force application to throw errors but they don't create the app.log.http://www.sagewire.org/server-admin/logs-not-working-1981754.aspxrss@sagewire.orgWed, 17 Oct 2007 18:47:12 GMThttp://www.sagewire.org/server-admin/Does-session-end-when-user-closes-browser-1979647.aspxI need some clarification on the topic of sessions ending upon closing of a browser. Here's my situation: I have a web-based terminal emulator to gain access to the mainframe application. From this web-based emulator, I am invoking a web application. Once I do this, I have two separate windows open (two separate sessions?). Once I close my web application (but keep open the web-based terminal emulator), I am assuming that the session ends for that application. I find that this ...http://www.sagewire.org/server-admin/Does-session-end-when-user-closes-browser-1979647.aspxrss@sagewire.orgMon, 15 Oct 2007 22:56:44 GMThttp://www.sagewire.org/server-admin/How-to-enable-RDS-AFTER-installing-1887651.aspxI have got CFMX7 already installed and running. I didn't enable RDS when I installed. But I want to enable RDS now. Is this possible? If so, how? Thanks.http://www.sagewire.org/server-admin/How-to-enable-RDS-AFTER-installing-1887651.aspxrss@sagewire.orgMon, 15 Oct 2007 16:20:08 GMThttp://www.sagewire.org/server-admin/Setting-memory-size-for-CF8-j2ee-Instances-1977102.aspxI am running 4 instances of Cold Fusion 8 on each of two servers. One instance on each server is part of a cluster. The other three instances on each server (6 total between the servers) are running web sites for other clients. Since I am running the sites using j2ee, I don't have a JAVA and JVM preferences page, so how do I set the max memory sizes so that I can properly allocate memory among the various instances? (Or, with different numbers of different complexities of Cold F...http://www.sagewire.org/server-admin/Setting-memory-size-for-CF8-j2ee-Instances-1977102.aspxrss@sagewire.orgMon, 15 Oct 2007 15:41:33 GMThttp://www.sagewire.org/server-admin/Newbie-Defining-CF8-Clustered-website-in-IIS-and-D-1974160.aspxI have two web servers on which I want to host a single web site using Cold Fusion 8 clustering. Both servers are running Windows 2003 R2 Enterprise: Web1, among other things a domain controller with its own IP, plus an IP for the website. Web2, the secondary domain controller with its own IP, plus an IP for the website. This is four different IPs. I have already defined a Cold Fusion 8 instance on each server and on Web1 I have created a cluster of the two instances. ...http://www.sagewire.org/server-admin/Newbie-Defining-CF8-Clustered-website-in-IIS-and-D-1974160.aspxrss@sagewire.orgSun, 14 Oct 2007 00:15:47 GMThttp://www.sagewire.org/server-admin/cf8-crashing-1959087.aspxwe have got a new cf8 server and it is behaving very irratically at the moment. Currently I'm getting:- "Server Error -------------------------------------------------------------------------------- Either the Macromedia application server(s) are unreachable or none of them has a mapping to process this request." Any idea whats happening here?http://www.sagewire.org/server-admin/cf8-crashing-1959087.aspxrss@sagewire.orgSat, 13 Oct 2007 05:07:12 GMThttp://www.sagewire.org/server-admin/Granting-access-to-just-Data-Services-1962940.aspxIs there a way to just grant access to the "Data & Services" portion of the administrative page?? As far as I can see (since I am not a ColdFusion expert) that the admin password will open all options to be seen etc. I'd like for the web folks to make the additions for additional data sets, but not sure I want the server options etc available. Any thoughts? TIAhttp://www.sagewire.org/server-admin/Granting-access-to-just-Data-Services-1962940.aspxrss@sagewire.orgWed, 10 Oct 2007 15:59:26 GMThttp://www.sagewire.org/server-admin/Adding-failover-server-info-to-db-connection-strin-1963392.aspxUsing ColdFusion 7 & SQL Server 2005, JDBC1.1 I need to add in a failover server to the connection string when adding a new datasource in the CFADMIN and am not having any luck. When I verify the datasource it comes back true; however when we test to see if our app runs when the primary db fails, ColdFusion doesnt recognize the alternate server. Does anyone know how to make this work? Cheers,http://www.sagewire.org/server-admin/Adding-failover-server-info-to-db-connection-strin-1963392.aspxrss@sagewire.orgTue, 09 Oct 2007 22:25:22 GMThttp://www.sagewire.org/server-admin/Cold-Fusion-causes-high-memory-usage-of-winlogonex-62943.aspxHello, I've 3 Cold Fusion 7 Standard servers running on Dell servers with Windows 2003 Web Edition, all of them are using vast ammounts of RAM for winlogon.exe. Task manager and http://www.lightmaker.comhttp://www.sagewire.org/server-admin/Cold-Fusion-causes-high-memory-usage-of-winlogonex-62943.aspxrss@sagewire.orgTue, 09 Oct 2007 17:18:18 GMThttp://www.sagewire.org/server-admin/Application-restart-1968963.aspxTrying to restate/rephrase a posting I did around a week ago. Here it goes ... Is there a way to shutdown/restart a selected application from ColdFusion Admin pages? If yes, how do I do it (without rebooting the server)? Thanks. - Milindhttp://www.sagewire.org/server-admin/Application-restart-1968963.aspxrss@sagewire.orgTue, 09 Oct 2007 16:49:19 GMThttp://www.sagewire.org/server-admin/Developer-for-Standard-Edition-1969202.aspxI need to restrict a developer edition the same as standard edition is restricted, so I can tell my customers to buy Standard instead of Enterprise edition. Is that possible ? I just need to test my application under a Standard Edition installation before telling my customers to buy Standard instead of Enterprise edition, but I think Developer Edition allows me to do anything from Enterprise edition, so I am not sure if my application will work in the standard edition. Will just a ...http://www.sagewire.org/server-admin/Developer-for-Standard-Edition-1969202.aspxrss@sagewire.orgMon, 08 Oct 2007 22:25:15 GMThttp://www.sagewire.org/server-admin/resource-direction-for-multiple-server-instances-1964641.aspxCan someone point me at documentation, white paper, benchmark testing results or other information that'd be useful for determining practical resource requirements when considering deployment with multiple server instances? The white paper "Multiple server instances in Cold Fusion 8 Enterprise Edition", (http://www.adobe.com/products/Cold Fusion/pdfs/cf8_multiple_instances_wp.pdf) describes the needed approach, but doesn't provide any clues as to reasonable expectation as to the ...http://www.sagewire.org/server-admin/resource-direction-for-multiple-server-instances-1964641.aspxrss@sagewire.orgMon, 08 Oct 2007 16:30:46 GMThttp://www.sagewire.org/server-admin/Migration-from-CF61-to-CF8-1957911.aspxWe are in the process of migrating from CF6.1 to CF8. We are running in a Redhat linux environment. I created a car file in CF6.1 and then on the new server deployed the file. The message at the end of the deployment indicated it was successful, although there were a number of error messages that appeared during the deployment that I haven't analyzed yet. However, reading closely in the documentation I see the following Cold Fusion 8 doesn't unpack archives created...http://www.sagewire.org/server-admin/Migration-from-CF61-to-CF8-1957911.aspxrss@sagewire.orgMon, 08 Oct 2007 13:36:27 GMThttp://www.sagewire.org/server-admin/can-not-get-Cold-Fusion-to-work-on-Vista-1938137.aspxNeed help, tried other stuff on other postings trying to edit jrundll file that does not seem to exist I will look at so many places to try and get Cold Fusion 7 or 8 to work with IIS or Apache on Windows Vista Ultimate which came pre-loaded with the new laptop. It just gives me a 404 error complaining about the MIME types. I saw one forum that I need to edit the wcnfiguration.config files (some name similar to that) in the system 32 interdel folder, but I get an access denied ...http://www.sagewire.org/server-admin/can-not-get-Cold-Fusion-to-work-on-Vista-1938137.aspxrss@sagewire.orgSun, 07 Oct 2007 20:01:57 GMThttp://www.sagewire.org/server-admin/Does-CFMX-support-SQL-SERVER-2005-1912407.aspxWe are getting this error only when executing a stored procedure that utilizes link servers. The error is: [Macromedia][SQLServer JDBC Driver][SQLServer]Named Pipes Provider: Couldn't open a connection to SQL Server [5]. Our SQL Server is set to use Windows authentication only (Kerberos-based authentication). The error above happens when a stored procedure needs to query a table from another server (linked server). We've loaded the latest DataDirect JDBC drivers (3.5) htt...http://www.sagewire.org/server-admin/Does-CFMX-support-SQL-SERVER-2005-1912407.aspxrss@sagewire.orgSat, 06 Oct 2007 00:55:14 GMThttp://www.sagewire.org/server-admin/NO-DSN-Created-1964019.aspxI am not able to crate the DSN through Admin of Cod fusion 6.1 .It Give me error : Connection verification failed for data source: Gearsource []JAVA.sql.SQLException: [Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Couldn't use '(unknown)'; file already in use. The root cause was that: JAVA.sql.SQLException: [Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Couldn't use '(unknown)'; file already in ...http://www.sagewire.org/server-admin/NO-DSN-Created-1964019.aspxrss@sagewire.orgFri, 05 Oct 2007 13:23:18 GMThttp://www.sagewire.org/server-admin/702-on-JAVA-15-1962801.aspxI'm trying to get 7.0.2 running on any 1.5 jdk, with limited success. The steps I took are: 1. stop ColdFusion services 2. install 1.5 3. install JRun4 updater (6) into cfusionmx7/runtime 4. modify jvm.config to point to the 1.5 jre 5. restart ColdFusion Everything appears to work except for my flex2gateway calls, which fails with: 500 JAVA.lang.NullPointerException at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.JAVA:258) at jrun.servlet.Servle...http://www.sagewire.org/server-admin/702-on-JAVA-15-1962801.aspxrss@sagewire.orgThu, 04 Oct 2007 19:14:52 GMThttp://www.sagewire.org/server-admin/Windows-authentication-problem-1959591.aspxI am having problems with a ColdFusion server on windows. When I attempt to use flash forms or almost any other type of form that is new on the server I get a dialog that asks for a password. Example http://hauntworld.com/flash_form.CFM I have no idea why this is doing this, or how to change it. There is no security set up for the directory and you can actually just continually click on cancel and eventually it'll show the form and the form behaves like it should. If I remove all t...http://www.sagewire.org/server-admin/Windows-authentication-problem-1959591.aspxrss@sagewire.orgThu, 04 Oct 2007 03:21:47 GMThttp://www.sagewire.org/server-admin/Enable-Performance-Monitoring-wont-stay-checked-in-1940480.aspxThe checkbox for Enable Performance Monitoring under the debugging options tab in my CF8 install won't stay checked. Also when I try to use the performance monitor to monitor CF8 it doesn't work. Any ideas?http://www.sagewire.org/server-admin/Enable-Performance-Monitoring-wont-stay-checked-in-1940480.aspxrss@sagewire.orgWed, 03 Oct 2007 01:00:54 GMThttp://www.sagewire.org/server-admin/Rogue-HTML-appearing-in-URL-strings-1956821.aspxThis is really an odd one. I just installed ColdFusion 8. I have been running the monitor to see how things are performing. I noticed a really odd error happening. Somehow, some standard HTML from the web page is finding its way into the URL string that is passed to the next page when a link is clicked. There is absolutely no way that this html is being set as a variable anywhere. There is no code in the template that should cause the HTML to appear on the URL string. Yet its ...http://www.sagewire.org/server-admin/Rogue-HTML-appearing-in-URL-strings-1956821.aspxrss@sagewire.orgTue, 02 Oct 2007 09:28:48 GMThttp://www.sagewire.org/server-admin/Troubles-with-verity-338263.aspxI am working on building a collection for my RETS search system, and I am having issues with the verity server it's self. When I run my test app, I get this error. Unable to connect to the Cold Fusion MX Search service. On Windows you may need to start the Cold Fusion MX Search Server from the services control panel. On Unix, you may need to run the 'cfmxsearch' script in the Cold Fusion MX bin directory. Error: JAVA.io.IOException: unable to obtain from connection pool: cann...http://www.sagewire.org/server-admin/Troubles-with-verity-338263.aspxrss@sagewire.orgMon, 01 Oct 2007 22:42:53 GMThttp://www.sagewire.org/server-admin/Cold-Fusion-over-home-network-1940824.aspxI recently read that in addition to Localhost, the development version of ColdFusion will now allow access via 2 client machines. I am running MX7 using the built in webserver, and'd like to be able to test on a second machine. Both machines are hooked up to the internet via a DSL router and have XP Pro. I thought it'd be as easy as just putting the IP address of the machine with ColdFusion installed on it (w/:8500 appended) into a browser on the second machine, but when I do s...http://www.sagewire.org/server-admin/Cold-Fusion-over-home-network-1940824.aspxrss@sagewire.orgMon, 01 Oct 2007 05:29:23 GMThttp://www.sagewire.org/server-admin/Couldnt-find-the-Cold-Fusion-Component-or-Interfac-1953784.aspxI am going online 4 the first time. I have a folder called "com" at the root folder. I then use Application.CFCROOT = "Havesters.com"; When I reference it like this - Home = createObject("component","#Application.cfcRoot#.Index"); I get the below error even though ir runs on the PC well. The hosting platform is Windows The error can be seen here http://www.havesters.com/test1.CFM Couldn't find the Cold Fusion Component or Interface Havesters.com.Index. Ensure th...http://www.sagewire.org/server-admin/Couldnt-find-the-Cold-Fusion-Component-or-Interfac-1953784.aspxrss@sagewire.orgMon, 01 Oct 2007 05:22:13 GMThttp://www.sagewire.org/server-admin/CF8JRun4-Cluster-for-Load-Balancing-1899777.aspxDoes anyone have an example of how to set up a CF8/JRun4 cluster for load balancing? I have three servers: x004 - Linux - Apache2 (10.0.0.54,10.1.0.54) x020 - Linux - JRun4/CF8 (10.0.0.70,10.1.0.70) x021 - Linux - JRun4/CF8 (10.0.0.71,10.1.0.71) Every server in our network has two network cards. One network card is attached to 10.0.x.x which has a gateway to the internet and runs at 100Mbps and is firewalled, and the other is attached to 10.1.x.x which runs at 1Gbps and is...http://www.sagewire.org/server-admin/CF8JRun4-Cluster-for-Load-Balancing-1899777.aspxrss@sagewire.orgMon, 01 Oct 2007 04:54:02 GMT